A paper sizes explained, A0 to A6
A-series paper runs from A0, the largest size in this guide, to A6, the smallest: A0 measures 841 × 1189 mm, while A6 measures 105 × 148 mm. Each step down halves the previous sheet across its longer side, so the area halves but the proportions stay the same. Use the dimensions below to choose a page size, then resize the document rather than relying only on print scaling; for help with other paper and printing settings, see the Print & page guide.
How A0 through A6 scale from one square metre
A0 is the starting point for the A series. Its dimensions are 841 × 1189 mm, giving it a nominal area of one square metre. Cutting an A0 sheet in half across its longer side produces two A1 sheets. Halving A1 produces A2, and the pattern continues through A3, A4, A5 and A6.
The number after the A tells you how many halving steps separate that size from A0. A1 is one step below A0 and has half its area. A4 is four steps below A0 and has one-sixteenth of its area. A6 is six steps below A0 and has one-sixty-fourth of its area.
| Size | Dimensions in millimetres | Approximate dimensions in inches | Area relative to A0 | Sheets that fit within A0 |
|---|---|---|---|---|
| A0 | 841 × 1189 mm | 33.1 × 46.8 in | 1 | 1 |
| A1 | 594 × 841 mm | 23.4 × 33.1 in | 1/2 | 2 |
| A2 | 420 × 594 mm | 16.5 × 23.4 in | 1/4 | 4 |
| A3 | 297 × 420 mm | 11.7 × 16.5 in | 1/8 | 8 |
| A4 | 210 × 297 mm | 8.3 × 11.7 in | 1/16 | 16 |
| A5 | 148 × 210 mm | 5.8 × 8.3 in | 1/32 | 32 |
| A6 | 105 × 148 mm | 4.1 × 5.8 in | 1/64 | 64 |
The width and height in the table assume portrait orientation. A landscape A4 page is still A4, but its dimensions are written as 297 × 210 mm instead of 210 × 297 mm. Rotating the page does not change its paper size, area or proportions.
Every A-series sheet has an aspect ratio of approximately 1:1.414, or 1:√2. This ratio is what makes the halving system work. When the long side is divided in two, each resulting sheet has the same proportions as the original after it is rotated.
That consistency matters when documents move between sizes. A page designed for A4 can be reduced proportionally to A5 without changing its overall shape. Text, images and margins become smaller together instead of the layout becoming wider or narrower. Moving one size down uses a linear scale of about 70.7%; moving one size up uses about 141.4%.
For example, reducing an A3 page to A4 at about 70.7% preserves its proportions. Enlarging A4 to A3 at about 141.4% does the reverse. Moving two sizes, such as A4 to A6, uses approximately 50% of the original width and height. The physical area becomes one-quarter of the original because both dimensions are halved.
The same proportions do not guarantee that every document will remain easy to use after scaling. Reducing an A3 poster to A4 may preserve the layout while making its smallest text difficult to read. Enlarging an A6 design to A4 preserves the arrangement but may expose low-resolution images or thin lines. The A-series geometry protects the page shape, not the quality or legibility of its contents.
How to choose the right A size for a PDF
Choose an A size from the document’s intended physical output, not from how large the page looks on screen. A PDF viewer can enlarge a small page or shrink a large one to fit the same window, so screen appearance alone does not reveal the document’s paper size.
The correct choice also depends on whether you need to change the PDF itself or only print it temporarily on different paper. Those actions can produce similar-looking printouts, but they do not make the same change to the file.
Match the page dimensions to the finished output
Start with the required finished dimensions. If a printer, publisher, school, office or other recipient specifies A4, the PDF page should normally be 210 × 297 mm in portrait orientation or 297 × 210 mm in landscape orientation. Do not choose A4 merely because it is familiar if the required result is actually A3, A5 or another format.
Larger A numbers mean smaller sheets. This is easy to reverse accidentally: A3 is larger than A4, while A5 is smaller than A4.
Consider what must remain readable at the finished size. A document may technically fit a sheet but still be unsuitable once printed. Check:
- Text size. Reduction makes body text, footnotes and labels smaller.
- Margins. Narrow margins can enter a printer’s unprintable edge area.
- Images. Enlargement can make low-resolution graphics look soft or pixelated.
- Lines and diagrams. Thin rules may weaken or disappear when reduced.
- Forms and writing spaces. Boxes that look adequate on screen may be too small to complete by hand.
- Bleed and trim. Commercial printing may require artwork beyond the final trimmed edge.
A0, A1 and A2 are large formats compared with common desktop-printer paper. Before choosing one, confirm that the intended printer can handle the required sheet or that the job will be sent to a suitable print service. A PDF can contain an A0 page even when the printer connected to your computer cannot output A0 paper.
Check the PDF page size instead of its zoom level
Use the PDF viewer’s document or page properties to inspect the page dimensions. Depending on the application, the measurement may appear in millimetres, centimetres, inches or points. Convert the units if necessary and compare both dimensions with the table above.
Orientation is another separate property. A portrait A4 page and a landscape A4 page have the same physical dimensions in opposite order. Rotating a page changes the direction in which its contents are viewed, but rotation alone does not turn A4 into A3 or A5.
If the reported dimensions are close to an A-series size but not exact, find out why before forcing a conversion. A scan may include extra border space around the original sheet. A professionally prepared file may include bleed outside the finished trim size. Another document may use North American Letter paper, which is similar to A4 but has different proportions.
Separate page size from printing scale and printable area
A PDF page size describes the document’s canvas. The paper selected in the print dialog describes the physical sheet loaded into or requested from the printer. Print scaling controls how the PDF page is placed on that sheet. These are related settings, but they are not interchangeable.
A Fit option usually enlarges or reduces the page so that it fits within the printer’s printable area. It does not permanently convert the PDF page to the selected paper size. If you reopen the original file, its page dimensions remain unchanged.
An Actual size or 100% option prints the page without scaling. If the PDF is larger than the available sheet or printable area, content near the edges can be cut off. A Shrink oversized pages option reduces pages that are too large while leaving smaller pages unchanged. A custom percentage applies a scale chosen by the user.
The printable area may be smaller than the physical sheet because many printers cannot place ink or toner directly against every edge. An A4 PDF printed at 100% on A4 paper can therefore lose edge content if the design extends beyond the printer’s limits. Borderless printing, when supported, is a printer capability and setting; it is not guaranteed by giving the PDF the same dimensions as the paper.
Cropping is different again. Cropping changes which part of a page is visible, and in some PDF workflows it can hide material without deleting it. It should not be treated as a substitute for proportional resizing when the entire page needs to remain visible.
How to resize a PDF to an A-series page
Resize the PDF itself when the file must consistently open, share or print as the chosen A size. Use print scaling instead when you only need a temporary printout and the original PDF dimensions should remain unchanged.
Before resizing, save a copy of the original. A conversion may alter margins, text size, image quality or the relationship between page content and interactive elements. Keeping the source file makes it easier to try another method if the first result is unsuitable.
Use this process to apply an A-series size:
- Identify the required size and orientation. Choose A0, A1, A2, A3, A4, A5 or A6 from the finished output requirements. Record the portrait dimensions from the table and swap width and height for landscape.
- Inspect every page in the PDF. Check for mixed page sizes, unexpected scan borders, rotated pages, bleed and content close to the edges.
- Decide whether the content should fit or fill the new page. Fit keeps all content visible but may add margins. Fill covers the page but may crop content when the source and target proportions differ.
- Preserve the aspect ratio. Avoid changing width and height independently, because that stretches text, images and shapes. A-series pages already share one aspect ratio, so a proportional conversion between them should not distort the layout.
- Apply the target dimensions. Enter the exact millimetre measurements for the chosen A size and apply them to the intended page range. Do not assume that selecting a paper name in a print menu changes the stored PDF.
- Review the resized file at the intended physical scale. Check body text, captions, form fields, diagrams, image sharpness and margins. Pay special attention when reducing a large page by more than one size.
- Download or save the result as a new PDF. Give it a name that includes the output size if several versions will be kept, such as report-a4.pdf or poster-a2.pdf.
- Run a print preview or test print. Confirm the selected paper, orientation and scaling. Use Actual size only when the PDF page and paper match and the content remains inside the printer’s printable area.
If the source and target are both standard A-series sizes, proportional scaling should preserve the page shape. If the source is Letter, Legal, a presentation slide, a photograph or a custom scan, its aspect ratio may differ. Fitting that page to an A-series canvas produces blank space on two sides. Filling the canvas removes the blank space but crops part of the source. Stretching it to both edges distorts the contents and is usually the poorest choice.
For professional printing, ask whether the requested dimensions refer to the final trim size or to a larger production sheet that includes bleed and printer’s marks. A design intended to finish at A4 may be supplied on a page larger than 210 × 297 mm so artwork can extend beyond the cut edge. Resizing that production file directly to A4 could remove or compress material the printer needs.
After resizing, verify the page dimensions in a PDF viewer rather than judging the result from its on-screen size. A page that fills the viewer window may still have the wrong physical measurements. The stored width and height are the reliable test.
Source: A-series standard scope from ISO 216:2007 — Writing paper and certain classes of printed matter, International Organization for Standardization; A0 to A6 dimensions and the A-series halving principle from Herzlichen Glückwunsch, A4!, DIN; and PDF cropping, page boxes and print-scaling behavior from Crop pages in PDFs and Adjust page size for printing PDFs, Adobe. Page last checked 2 October 2026.