Skip to main content

Paper sizes in pixels

A4 paper measures 210 × 297 mm, or 21 × 29.7 cm, and becomes approximately 595 × 842 pixels at 72 PPI, 1240 × 1754 pixels at 150 PPI, or 2480 × 3508 pixels at 300 PPI. US Letter measures 8.5 × 11 inches, or 21.59 × 27.94 cm, and becomes 612 × 792, 1275 × 1650, or 2550 × 3300 pixels at those same resolutions. Use these dimensions when creating raster artwork for print, but check the required paper size, resolution, margins and scaling before applying the result to a PDF in the wider Print & page guide.

GRID IS CONCEPTUAL A4 · 210 × 297 MM 72 DPI 595 × 842 px 150 DPI 1240 × 1754 px 300 DPI 2480 × 3508 px Same sheet, more pixels.
The paper never changes size. Raising the DPI only packs more pixels into the same A4 sheet.

Paper size and resolution together determine the pixel dimensions

Denser grid = more pixels for the same physical sheet (conceptual cue).

PaperOrientationDPI

A4 · Portrait · 300 DPI → 2480 × 3508 px

210 × 297 mm (8.27 × 11.69 in)

Presets · portrait · pixels = inches × DPI
Paper72 DPI150 DPI300 DPI
A4595 × 8421240 × 17542480 × 3508
Letter612 × 7921275 × 16502550 × 3300

Pixels = physical inches × DPI. The same paper size needs more pixels at higher DPI.

Pixels = physical inches × DPI. The same paper size needs more pixels at higher DPI.

A sheet of paper does not have one fixed size in pixels. Its physical dimensions remain constant, but its pixel dimensions change according to the resolution assigned to the image.

The calculation is:

pixel dimension = physical dimension in inches × pixels per inch

For a metric paper size, convert millimeters to inches first:

inches = millimeters ÷ 25.4

The final result must use whole pixels. When a calculation produces a fraction, as it does for A4, round it to the nearest whole pixel. This rounding changes the physical result by only a tiny fraction of an inch and is normal when converting between metric measurements and a whole-pixel grid.

The table below gives portrait dimensions. For landscape artwork, swap the width and height.

Paper size Physical dimensions 72 PPI 150 PPI 300 PPI
A4 210 × 297 mm 595 × 842 px 1240 × 1754 px 2480 × 3508 px
US Letter 8.5 × 11 in 612 × 792 px 1275 × 1650 px 2550 × 3300 px

A4 requires rounded pixel dimensions

A4 is an ISO paper size with exact trimmed dimensions of 210 × 297 mm. That is approximately 8.2677 × 11.6929 inches, so multiplying by a whole-number resolution usually produces fractional pixel values.

At 300 PPI, for example:

  • Width: 210 ÷ 25.4 × 300 = 2480.315 pixels
  • Height: 297 ÷ 25.4 × 300 = 3507.874 pixels

Rounding gives the commonly used A4 canvas of 2480 × 3508 pixels at 300 PPI. The same calculation produces 1240 × 1754 pixels at 150 PPI and 595 × 842 pixels at 72 PPI.

US Letter produces whole-pixel values at common resolutions

US Letter is exactly 8.5 × 11 inches. Its dimensions therefore multiply cleanly at 72, 150 and 300 pixels per inch:

  • At 72 PPI: 8.5 × 72 = 612 and 11 × 72 = 792
  • At 150 PPI: 8.5 × 150 = 1275 and 11 × 150 = 1650
  • At 300 PPI: 8.5 × 300 = 2550 and 11 × 300 = 3300

This makes 2550 × 3300 pixels the standard full-page Letter canvas at 300 PPI.

The values in the table describe the entire trimmed sheet. They do not automatically add printer margins, binding space or bleed. A home or office printer may be unable to print to the physical edge, while a commercial printer may ask for artwork extending beyond the trim line. Treat those requirements separately from the basic paper-size calculation.

Choose the resolution that matches the document’s final use

The correct pixel dimensions depend on how the page will be produced. Before selecting 72, 150 or 300, identify whether the file is a screen preview, an ordinary office print, a detailed commercial print or a PDF containing scalable vector content.

Although people commonly describe these values as DPI, raster artwork is more precisely measured in pixels per inch, or PPI. DPI describes the physical dots a printer can place within an inch. A printer may use several ink or toner dots to reproduce one image pixel, so a printer advertised as 600 or 1200 DPI does not require an image with the same number of pixels per inch.

Use 72 PPI for lightweight previews, not detailed print artwork

At 72 PPI, a full A4 page contains only about 595 × 842 pixels. A Letter page contains 612 × 792 pixels. Those dimensions can be useful for thumbnails, quick on-screen previews or low-bandwidth reference images, but there is little image data available for fine text, diagrams or photographs printed at full-page size.

Use 150 PPI when file size matters more than fine detail

At 150 PPI, A4 artwork is approximately 1240 × 1754 pixels and Letter artwork is 1275 × 1650 pixels. This provides more detail than a 72 PPI preview while using only one quarter of the pixels required by the same page at 300 PPI.

A 150 PPI page may be suitable for drafts, internal office documents, simple graphics or output viewed from farther away. It is less dependable for small type converted into pixels, detailed line art, fine textures or photographs that need close inspection.

Do not assume that changing a file’s resolution label from 72 to 150 PPI creates more detail. If resampling is disabled, the application keeps the original pixels and changes only the calculated print size. If resampling is enabled, the application can generate additional pixels, but those estimated pixels cannot restore details that were absent from the original image.

Use 300 PPI for detailed print-ready raster pages

A 300 PPI canvas provides four times as many total pixels as the same physical page at 150 PPI because both the width and height are doubled. This makes 300 PPI a common target for high-quality printed photographs, detailed raster graphics and pages that will be examined at close range.

Use 2480 × 3508 pixels for A4 or 2550 × 3300 pixels for Letter when the complete page must be rasterized at 300 PPI. If the design includes bleed, calculate the extra physical width and height at the same resolution rather than stretching the finished canvas later.

Resolution is not the only quality check. A 300 PPI page can still print poorly if a photograph placed inside it has too few source pixels. For example, enlarging a small web image across most of a 300 PPI page reduces its effective resolution. Check the resolution of each placed raster image at its final printed size.

Vector text, paths and illustrations behave differently. They are described mathematically and can usually be scaled or printed without being tied to a fixed pixel grid. Keeping text and line art as vector content in a PDF often produces cleaner results than flattening the whole page into one raster image.

Set the page dimensions before creating or resizing the PDF

Choose the final paper format before building the design. Converting between A4 and Letter after a page is complete can change line breaks, move elements or force the content to be scaled because their aspect ratios do not match.

Create raster artwork at the intended print size

Use this process when making a full-page image in a photo editor, drawing application or other pixel-based tool:

  1. Confirm whether the finished sheet will be A4 or US Letter.
  2. Ask the printer or recipient what image resolution and bleed they require.
  3. Enter the physical dimensions: 210 × 297 mm for A4 or 8.5 × 11 inches for Letter.
  4. Enter the required resolution, such as 300 PPI for detailed print artwork.
  5. Confirm that the calculated pixel dimensions match the expected values.
  6. Add bleed as extra canvas beyond the final trimmed dimensions if the printer requires it.
  7. Keep important text and graphics inside the printer’s safe area rather than placing them directly against the page edge.
  8. Export to a format that preserves the required quality, color settings and transparency.
  9. Create the PDF without applying another unintended round of scaling or compression.

If the application asks only for pixels, enter the dimensions from the reference table. Then verify that the intended physical size and resolution are embedded when the artwork is exported. A 2480 × 3508 image does not inherently mean A4 unless it is printed at approximately 300 PPI.

Check an existing PDF before changing its page size

A PDF page normally records a physical page box rather than a required screen pixel count. Letter pages commonly use 612 × 792 default PDF units because there are 72 units per inch. A4 pages use approximately 595.28 × 841.89 units.

Before resizing an existing PDF, check:

  • Current page size. Confirm whether the document is already A4, Letter or a custom format.
  • Page orientation. A landscape page uses the same measurements with width and height reversed.
  • Content type. Vector text and shapes usually scale cleanly, while raster images have a limited pixel count.
  • Scaling method. Fitting content preserves its proportions; stretching it changes shapes and can distort text or images.
  • Cropping risk. Filling a differently proportioned page can push content beyond the new boundaries.
  • Margins and printable area. The PDF page can match the paper while content still falls outside the area a printer can reproduce.
  • Bleed and trim marks. Commercial-print elements should not be removed or included in the final trim size by accident.

When changing A4 to Letter or Letter to A4, decide whether the priority is preserving every part of the content, filling the new sheet or maintaining the original scale. Fitting the complete page is usually safer than stretching it. It may leave narrow blank areas because the two paper formats have different proportions.

A PDF page-resizing tool can change the page format and scale its contents together. After resizing, inspect several pages at high magnification and print a test page at actual size. Check small text, photographs, page edges and alignment rather than relying only on the dimensions shown in the file properties.

Source: A-series paper standard information from ISO 216:2007 — Writing paper and certain classes of printed matter, International Organization for Standardization; A4 and North American Letter dimensions from CSS Paged Media Module Level 3, World Wide Web Consortium; pixel-dimension, physical-size and resolution calculations from Image size, resolution, and resampling in Photoshop, Adobe; and PDF user-space measurements from the PDF Reference, Second Edition, Adobe. Page last checked 2 October 2026.