Skip to main content

A4 vs letter paper size

A4 measures 210 × 297 mm (8.27 × 11.69 inches), while US Letter measures 8.5 × 11 inches (215.9 × 279.4 mm). A4 has about 3.4% more total area, but it is 5.9 mm narrower and 17.6 mm taller, so neither size fits inside the other at full scale. If a document crosses between these standards, use the guidance in Print & page to decide whether to scale it for one print job or resize the PDF pages permanently.

Letter A4 Letter · 8.5 × 11 in A4 · 210 × 297 mm Letter is 6 mm wider A4 is 18 mm taller
Aligned at one corner and drawn to scale, US Letter is 6 mm wider and A4 is 18 mm taller.

A4 is narrower and taller than Letter

Clipped Unused
Document Target Mode Orientation

At actual size: clips 18 mm off the bottom; unused 6 mm strip on the right.

Page geometry only — printer margins vary.

Page geometry only — printer margins vary. Actual size shows what falls outside the target; fit to page shows the uniform scale needed.

A4 and Letter look similar until their edges are aligned. With the pages centered in portrait orientation, Letter extends about 2.95 mm beyond each side of A4, while A4 extends about 8.8 mm beyond the top and bottom of Letter.

Measurement A4 US Letter Difference
Width 210 mm / 8.27 in 215.9 mm / 8.5 in Letter is 5.9 mm wider
Height 297 mm / 11.69 in 279.4 mm / 11 in A4 is 17.6 mm taller
Area 62,370 mm² 60,322 mm² A4 has about 3.4% more area
Width-to-height shape About 1:1.414 About 1:1.294 A4 is more elongated

The answer to “Is A4 bigger than Letter?” therefore depends on what bigger means. A4 has the greater area and longer edge, but Letter has the greater width in portrait orientation. Choosing one size solely because it sounds larger can produce the wrong result when a layout depends on exact margins, line lengths or form-field positions.

The difference is usually unobtrusive in documents with generous margins and flowing text. A business letter with wide margins may print acceptably on either sheet because all its content remains well inside both page boundaries. The mismatch becomes more noticeable in documents with:

  • borders or backgrounds extending close to the page edge;
  • headers and footers placed near the top or bottom;
  • wide tables, diagrams or signature lines;
  • labels, certificates or forms with fixed positions;
  • crop marks, bleed or other print-production elements;
  • scanned pages whose image fills the entire PDF page;
  • text set close to the minimum printable margin.

Orientation changes which edge appears wider, but it does not remove the mismatch. In landscape orientation, A4 becomes 297 × 210 mm and Letter becomes 279.4 × 215.9 mm. A4 is then wider but shorter, while Letter is narrower but taller. The same 5.9 mm and 17.6 mm differences have simply rotated with the pages.

A PDF also has its own page dimensions, independent of the paper loaded into a printer. Selecting Letter paper in a print dialog does not automatically change an A4 PDF into a Letter PDF. It only tells the printer which physical sheet to use and, depending on the selected scaling option, how the existing PDF page should be placed on that sheet.

How the size mismatch affects your PDF

The result depends on three separate measurements: the PDF page size, the selected paper size and the printer’s usable area. Check all three before assuming that a document will print correctly.

A printer’s usable or printable area is normally smaller than the full sheet because many printers cannot place ink or toner directly against every edge. A page can therefore have the same nominal dimensions as the loaded paper and still need slight scaling if important content reaches beyond the device’s printable boundary.

Actual size can crop content at the page edges

An Actual size or 100% setting preserves the dimensions of the PDF content. It does not shrink the page to compensate for a different sheet shape.

If an A4 PDF is centered on Letter paper at actual size, its 210 mm width fits within Letter’s 215.9 mm width. Its 297 mm height does not fit within Letter’s 279.4 mm height. In a simplified edge-to-edge comparison, about 17.6 mm of vertical content falls outside the Letter sheet, divided into roughly 8.8 mm at the top and 8.8 mm at the bottom when centered.

If a Letter PDF is centered on A4 paper at actual size, its 279.4 mm height fits within A4’s 297 mm height. Its 215.9 mm width does not fit within A4’s 210 mm width. Approximately 5.9 mm of horizontal content falls outside the A4 page, or about 2.95 mm on each side when centered.

Real printers may crop more because their printable areas do not necessarily reach the paper edges. A preview that shows content touching or crossing the printable-area boundary is a stronger warning than the nominal sheet measurements alone.

Actual size is appropriate when physical dimensions must remain unchanged and you know the page fits. Examples include templates, measurement scales, labels and forms designed for a particular sheet. It is risky when the source PDF and loaded paper use different standards.

Fit preserves all content but changes its scale

A Fit, Fit to page or similarly named option reduces or enlarges the PDF proportionally until the complete page fits inside the selected printable area. This usually prevents cropping, but it changes the physical size of text, graphics and measurements.

Ignoring printer margins, an A4 page must be reduced to about 94.1% to fit entirely on Letter paper. Its height is the limiting dimension. After that reduction, the content occupies less than Letter’s full width, leaving additional space at the sides.

A Letter page must be reduced to about 97.3% to fit entirely on A4 paper. Its width is the limiting dimension, leaving extra space above and below the reduced page. A printer may choose a slightly smaller percentage when it also has to account for non-printable margins.

These percentages explain why an ordinary report may appear almost unchanged while a precisely aligned form does not. A reduction to 97.3% is subtle to the eye, but it moves every field, rule and measurement. A 94.1% reduction is more noticeable and can make small type harder to read.

Shrink oversized pages is different from a general Fit option in some PDF applications. It reduces a page only when the page is too large for the selected paper; it does not enlarge pages that are already smaller. This is useful when enlargement is unnecessary or could make the document look inconsistent.

White space does not always mean the conversion failed

A proportional conversion preserves the document’s shape instead of stretching it. Because A4 and Letter have different aspect ratios, fitting one onto the other creates unused space along one pair of edges.

That white space is expected:

  • A4 fitted to Letter generally leaves more space at the left and right.
  • Letter fitted to A4 generally leaves more space at the top and bottom.
  • Landscape orientation rotates the location of the extra space.
  • Larger printer margins can increase the visible border around the content.

Removing every strip of white space would require either cropping the content or stretching it by different amounts horizontally and vertically. Non-proportional stretching can distort logos, photographs, circles, type and other graphics, so it is rarely the right solution.

To identify what is happening in your file, check the print preview and ask:

  • Is any content missing? The page may be printing at actual size and extending beyond the paper or printable area.
  • Is everything present but slightly smaller? A Fit or Shrink setting is probably active.
  • Are there wider margins on two sides? The page has likely been scaled proportionally between different shapes.
  • Does the PDF still report its original dimensions after printing? Only the printed output was scaled; the file itself was not resized.
  • Do circles look oval or text look unusually wide or narrow? The document may have been stretched non-proportionally.
  • Do only some pages behave differently? The PDF may contain pages with different dimensions or orientations.

How to print or resize a PDF for A4 or Letter

First decide whether you need a temporary print adjustment or a permanent page-size change. These solve different problems.

For a one-time print job:

  1. Open the PDF and select Print.
  2. Confirm that the printer contains the intended A4 or Letter paper.
  3. Select the matching paper size in the printer or page-setup controls.
  4. Review the orientation and choose portrait or landscape to match the PDF.
  5. Select Fit if preserving every part of the page is more important than maintaining exact physical dimensions.
  6. Select Actual size only if the document was designed for that paper or its content fits safely within the available area.
  7. Inspect the preview, especially borders, footers, page numbers, signatures and wide tables.
  8. Print one test page before sending a long or expensive job.

For a permanent conversion, resize the PDF pages to the required target dimensions. Choose A4 when the file must use 210 × 297 mm pages, or Letter when it must use 8.5 × 11 inch pages. A proper page-resizing operation changes the PDF’s page boundaries and fits the existing content within them, rather than merely changing the paper selected for one print job.

Before resizing, make a copy of the original PDF. Then check the converted file page by page. Pay particular attention to content that was close to an edge, interactive form fields, annotations, signatures, links, page labels and pages that use a different orientation from the rest of the document.

The best fitting method depends on the document:

  • Scale the entire page proportionally for reports, letters, manuals and most general documents. This keeps all content and avoids distortion.
  • Add margins without enlarging the content when exact text or graphic dimensions matter but a larger target page is acceptable.
  • Crop only deliberate empty space when the source has oversized blank borders. Do not crop meaningful headers, footers or printer marks.
  • Reflow or redesign the source document when text must remain at its original size and use the target page efficiently. A PDF resize cannot intelligently repaginate paragraphs in the way the original word-processing or layout application can.
  • Keep the original page size when the file contains scale drawings, labels, templates or other items whose physical dimensions are part of their purpose.

For forms, test whether the field positions still align with their labels after conversion. For scanned documents, make sure the scan remains centered and legible. For professionally printed material, ask the print provider which page size, bleed and crop-box settings it requires instead of assuming that an office-printing conversion is sufficient.

A mixed-size PDF needs extra attention. One file can contain A4, Letter and other page dimensions at the same time. Applying one conversion rule to every page may enlarge small pages, reduce large pages or create uneven margins. Check the dimensions of representative pages, or split the document by page size before resizing if each group needs different treatment.

The safest general rule is simple: use Fit when you only need the content to print without being cut off, and resize the PDF when the file itself must become A4 or Letter. Keep proportional scaling enabled unless distortion is intentional, and always inspect the result rather than relying on the paper-size label alone.

Source: A-series paper standard information from ISO 216:2007 — Writing paper and certain classes of printed matter, International Organization for Standardization; A4 and US Letter dimensions and regional usage from Standardization and the Law, Library of Congress; PDF print-scaling behavior from Adjust page size for printing PDFs in Acrobat, Adobe; and permanent PDF page-scaling guidance from Change the size of a PDF page using Acrobat Preflight, Adobe. Page last checked 2 October 2026.